Anyone can make a bird feeder at home. There are many different types of bird feeders can be done, as the platform feeders, tube feeding, hopper feeders, and suet feeders. But in its most basic form, a bird feeder is simply a raised surface on which the birds can feed, or a platform feeder. Creating a good feeding platform is very simple.
Platform feeders can be made on any flat surface. A popular way to make a platform feeder is to cut the front of a milk jug, leaving a border at the bottom to keep the seeds in bird seed can access in food through the hole, and the top of the milk jug keeps the rain off food. Small holes can also be nailed to the bottom of feeder to allow drainage of any rain that makes its way into the feeder. To hang a pot feeder, simply drill two holes on each side of the jug of milk, a hangar and yarn or string through the holes.
More solid platform feeders can be created with the timber. Make a feeder wooden platform is easy. Buy a piece of fine wood and saw on your site. Most of the platform feeders are about five inches square. Then, a 2×4 cut into long, thin pieces that attach around the platform. At two inches tall, these border pieces are the perfect height to keep the seeds in the feeder. To put the pieces of art, drive screws through the bottom of the food at the edges. Zinc-plated screws are recommended since they will not rust. Finally, with a very small drill bit, drill through the four corners of the platform right next to the sides. This will provide drainage holes so that the seeds do not get wet and spoil. It also lets you connect a hangar for the feeder. To hang the feeder, water-resistant cord to tie the four sides of food. Make sure that each of the four strings of equal length so that the feeder will hang flat. Then, tie the four together over power cords and hang using an S-hook.
If you live in a humid climate, you may want to do under a feeder platform using cutting-edge pieces, and screw below the screen frame. This easily spilled all the water and mold not in wetter climates. There are many other ways to mount a feeder timber. Placement short legs turn its power on a platform feeder earth. Feeding platform can also be mounted directly to a 2×4 or a metal bar of an inch.
Make a bird feeder is a successful project that will pay off when the birds begin to appear. Platform Feeders are the easiest way to start, since they are simple. All you need is a flat, raised surface on which to feed the birds in your yard.
Build your own wooden Bird House (b)!
You must log in to post a comment.